The Effectiveness of SKKNI Based Motorcycle Technician Training to Increase the Competitiveness of the Regional Automotive Workforce

Fuad Abdillah

doi:10.47134/jpn.v2i4.2024

Authors

Fuad Abdillah PJJ PVTM Universitas Ivet

DOI:

https://doi.org/10.47134/jpn.v2i4.2024

Keywords:

Labor Needs, SKKNI, Injection Motorcycle Technicians, Training Effectiveness

Abstract

The purpose of this study is to evaluate the effectiveness of motorcycle technician training based on the Indonesian National Work Competency Standards (SKKNI) in enhancing the competitiveness of the workforce in the automotive industry in specific areas. Although injection motorcycle technology has become the industry standard, a labor competency gap still hinders business. This study employs a quantitative approach with a descriptive-analytical design to collect data from 32 alums of UPT-BLK training in Grobogan Regency, using non-participatory observation, documentation, questionnaires, and literature reviews. The data were analyzed using multiple linear regression in SPSS. The results showed that the variables of Labor Needs (X1) and SKKNI Standard Injection Motorcycle Service (X2) contributed 95.5% to the Industrial World variable (Y). The value of the calculated F (21.399) is greater than the F of the table (2.69), and the significance of 0.045 is lower than 0.05. According to the t-test, Labor Needs had a positive and significant effect (t = 3.276; p = 0.082). On the other hand, SKKNI-standard service schemes show adverse effects, which require further investigation. This study demonstrates that SKKNI-based training is generally effective in enhancing the skills of technicians and addressing the gaps between vocational training and industrial needs. These results make a strategic contribution to the development of competency-based training policies and suggest that the curriculum be adapted to the needs of the job market in the current era of vehicles.

References

Amaral, A. A. D. C., Saidatin, N., Mahmud, R., & Maulana, H. S. (2023). Experimental Study of Spark Ignition Engine Performance under Different Electronic Control Units, Hole Injectors and Spark Plugs. Journal of Mechanical Engineering, Science, and Innovation, 3(1), 22–29. https://doi.org/10.31284/j.jmesi.2023.v3i1.2992 DOI: https://doi.org/10.31284/j.jmesi.2023.v3i1.2992

Anger, S., He, P., Janssen, S., & Leber, U. (2023). Employment-Related Further Training in a Dynamic Labour Market. 319–336. DOI: https://doi.org/10.1007/978-3-031-27007-9_14

Anisa, A., Islamb, R., & Hafita, N. I. A. (2022). Prioritisation of barriers for supply chain management implementation in the Malaysian automotive industry. Production, 32. https://doi.org/10.1590/0103-6513.20210073 DOI: https://doi.org/10.1590/0103-6513.20210073

Bastiaan, J. M. (2019). The AutoDrive Challenge : Autonomous Vehicles Education and Training Is- sues The AutoDrive Challenge at Kettering University : Autonomous Vehicles Education and Training Issues. 2004.

Bionics, A. (2023). Retraction Retracted: Correlation between the Quality of Talent Training and Regional Economic Development Based on Multivariate Statistical Analysis Model. 2022. https://doi.org/10.1155/2022/2206689 DOI: https://doi.org/10.1155/2023/9792125

Djati, S. P., Sudjana, I. M., Darsana, I. M., Sudiarta, I. N., & Mahendra, I. W. E. (2022). The Impact Of Certified Competency Tourism Human Resources In Facing The Aec Era: Case Study In Bali. TRJ Tourism Research Journal, 6(2), 207. https://doi.org/10.30647/trj.v6i2.152 DOI: https://doi.org/10.30647/trj.v6i2.152

Enterprises, S. (2023). Enrichment : Journal of Multidisciplinary Research and Development Education and Training Of Human Resources Technical Skills and The Preparation Of Standar Kompetensi Kerja Nasional Indonesia ( Skkni ) Of Production For Micro and. 1(7), 382–396. DOI: https://doi.org/10.55324/enrichment.v1i7.63

Fauziyah, S. N., Kuswinarno, M., Manajemen, P., & Madura, U. T. (2024). Analisa Peran Pelatihan dalam Meningkatkan Kinerja Karyawan : Kajian Literatur. 4.

Fuah, A. M., Zulhijariyanto, Cyrilla, L., Triyonggo, Y., & Assegaf, Z. (2020). Strategy for Kleder Competency Improvement in The Camara Nusantara Cattle Ship. Jurnal Ilmu Produksi Dan Teknologi Hasil Peternakan, 8(3), 131–136. https://doi.org/10.29244/jipthp.8.3.131-136 DOI: https://doi.org/10.29244/jipthp.8.3.131-136

Fuquen, H. S. (2020). M. A. Vélez, C. M. Sánchez, H. S. Fuquen Recibido: marzo 12 de 2019 – Aceptado: junio 15 de 2020. 14(27), 29–34. DOI: https://doi.org/10.31908/19098367.1741

Ginting, F., & Hasugian, P. S. (2020). Expert System Diagnoses Damage to Injection Motorcycles with the Certainty Factor Method. Journal Of Computer Networks, Architecture and High Performance Computing, 2(1), 124–128. https://doi.org/10.47709/cnapc.v2i1.372 DOI: https://doi.org/10.47709/cnapc.v2i1.372

Hendro Prastyo, H., Tulus Supriyanto, & Subekti Subekti. (2023). Pengaruh porting saluran intake dan exhaust terhadap kinerja kawasaki ninja 2 tak 150 cc. JTTM : Jurnal Terapan Teknik Mesin, 4(1), 11–17. https://doi.org/10.37373/jttm.v4i1.357 DOI: https://doi.org/10.37373/jttm.v4i1.357

Indra Triana Puspitasari, F., & Hamdi, E. (2023). Carimontir marketing PLAN s(motor vehicle service application). Jurnal Mantik, 7(1), 135–146. https://doi.org/10.35335/mantik.v7i1.3658 DOI: https://doi.org/10.35335/mantik.v7i1.3658

Info, A. (2024). Analyzing the Alignment between University Curriculum and Job Market Requirements in Pakistan: Challenges and Opportunities 1 1. 2(2). DOI: https://doi.org/10.59075/ijss.v2i2.269

Leader, F., Planning, S., Practice, B., & Sirait, T. (2024). Enrichment : Journal of Multidisciplinary Research and Development Implementation Of Talent Management System Through Management Trainee as. 2(8), 1–13.

Leite, J. V. G. D. A, et al. (2017). Melhoria de Processo Operacional Utilizando Mapa de Fluxo de Valor em Uma Indústria Metal- Mecânica Operating Process Improvement Using Value Stream Map on a Metal-Mechanics Industry João Victor Giavina de Almeida Leite. 146–170. DOI: https://doi.org/10.12819/2017.14.5.8

Mahdane, A., Hubeis, M., & Kuswanto, S. (2018). Pengaruh SKKNI dan Kompetensi SDM terhadap Pengembangan SDM di Unit Profesi SDM dalam Menghadapi Era MEA. MANAJEMEN IKM: Jurnal Manajemen Pengembangan Industri Kecil Menengah, 13(1), 1–9. https://doi.org/10.29244/mikm.13.1.1-9 DOI: https://doi.org/10.29244/mikm.13.1.1-9

McKeirnan, K., Fogarty, T. L., Durinck, C., Solidum, J., Shelton, G., Danagulyan, H., El Akel, M., Desselle, S., Bader, L., Bates, I., & James, S. (2022). Advancing a global pharmacy support workforce through a global strategic platform. Research in Social and Administrative Pharmacy, 18(8), 3448–3452. https://doi.org/10.1016/j.sapharm.2021.10.002 DOI: https://doi.org/10.1016/j.sapharm.2021.10.002

Mustafa, H., Azlan, M., Hussain, M., & Zulkifli, R. M. (2022). Industries and Vocational Training Centres Partnership : Issues and Improvement Plan Industries and Vocational Training Centres Partnership : Issues and Improvement Plan. 1(1), 134–144. https://doi.org/10.6007/IJARPED/v11-i1/11959

Mustafa, H., Mohammad Hussain, M. A., & Zulkifli, R. M. (2022). Industries and Vocational Training Centres Partnership: Issues and Improvement Plan. International Journal of Academic Research in Progressive Education and Development, 11(1), 134–144. https://doi.org/10.6007/ijarped/v11-i1/11959 DOI: https://doi.org/10.6007/IJARPED/v11-i1/11959

Pekerja, K., & Era, D. I. (2022). Kompetensi pekerja di era industri 4.0 1. 2(1), 119–127. DOI: https://doi.org/10.53363/bw.v2i1.74

Prihatno. (2021). Identifikasi Kebutuhan Kompetensi Sumber Daya Manusia Industri Perhotelan Kabupaten Bantul. Media Wisata, 15(1). https://doi.org/10.36276/mws.v15i1.87 DOI: https://doi.org/10.36276/mws.v15i1.87

Rachman, M. K., Latief, A. E., Raihan M, N., & Dharma, S. B. (2022). Perancangan Bracket Cetakan dan Simulasi Injection Molding untuk Komponen Slide Piece CVT. Jurnal Rekayasa Energi Dan Mekanika, 2(1), 74. https://doi.org/10.26760/jrem.v2i1.74 DOI: https://doi.org/10.26760/JREM.v2i1.74

Relationship, T., & Industrialization, B. (2020). Kaldor’un Birinci Yasası Çerçevesinde Sanayileşme ve Büyüme İlişkisi. 8(5), 1489–1496. DOI: https://doi.org/10.18506/anemon.647362

Rusalam, N. R., Soemarto, S., & Munnawar, W. (2020). Development of authentic assessment maintenance motorcycle chassis system. IOP Conference Series: Materials Science and Engineering, 830(4). https://doi.org/10.1088/1757-899X/830/4/042066 DOI: https://doi.org/10.1088/1757-899X/830/4/042066

Salsabila, S. I., & Hertati, D. (2022). Efektivitas Program Pelatihan Berbasis Kompetensi dalam Meningkatkan Kualitas Tenaga Kerja di UPTD BLK Kabupaten Kotawaringin Timur. Perspektif, 11(4), 1360–1368. https://doi.org/10.31289/perspektif.v11i4.7933 DOI: https://doi.org/10.31289/perspektif.v11i4.7933

Škrinjarić, B. (2022). Competence-based approaches in organizational and individual context. Humanities and Social Sciences Communications, 9(1), 1–12. https://doi.org/10.1057/s41599-022-01047-1 DOI: https://doi.org/10.1057/s41599-022-01047-1

Soares, D., da Silva, F. J., Ramos, S. C. F., Kirytopoulos, K., Sá, J. C., & Ferreira, L. P. (2022). Identifying Barriers in the Implementation of Agile Methodologies in Automotive Industry. Sustainability (Switzerland), 14(9). https://doi.org/10.3390/su14095453 DOI: https://doi.org/10.3390/su14095453

Sukardi, S., Wildan, W., & Fahrurrozi, M. (2019). Vocational Education: A Missing Link for the Competitive Graduates? International Education Studies, 12(11), 26. https://doi.org/10.5539/ies.v12n11p26 DOI: https://doi.org/10.5539/ies.v12n11p26

Surono, S., Pratama, D., & Budiono, A. (2024). Study on Mapping of Qualification, Occupation, and Competence in Human Resources Management to Improve Link and Match Between Industry and Education Program. Asian Journal of Engineering, Social and Health, 3(4), 792–812. https://doi.org/10.46799/ajesh.v3i4.299 DOI: https://doi.org/10.46799/ajesh.v3i4.299

Sutiman, S., Jaedun, A., Siddiq, M. B., Suyitno, S., & Nurtanto, M. (2022). Inhibiting Factors in Automotive Courses at the Job Training Centre. Journal of Education Technology, 6(1), 1–11. https://doi.org/10.23887/jet.v6i1.36563 DOI: https://doi.org/10.23887/jet.v6i1.36563

Thandlam, S., Muthalib, B. A., & Liyana, N. (2023). Find The Gap : An Approach For Visualizing And Analysing Design Competencies In A University. July, 24–28. https://doi.org/10.1017/pds.2023.189 DOI: https://doi.org/10.1017/pds.2023.189

Timora, B., & Kuala, U. (2021). The Effect Of Mechanical Worker Competency Standardization. 4(03), 94–105.

Trisanty, A. (2021). Analysis of Implementation of SKKNI Sub Funding and Services for Graduate of Vocation in Banking Sector. At-Taqaddum, 13(1), 73–84. https://doi.org/10.21580/at.v13i1.8353 DOI: https://doi.org/10.21580/at.v13i1.8353

Vigfússon, K., Jóhannsdóttir, L., & Ólafsson, S. (2021). Obstacles to strategy implementation and success factors: A review of empirical literature. Strategic Management, 26(2), 12–30. https://doi.org/10.5937/straman2102012v DOI: https://doi.org/10.5937/StraMan2102012V

Xiaoxu, W., Zhien, L., Xin, X., & Chihua, L. (2020). Exploration of Training Mode for International Based on PACE Program. Iceipi, 265–269.

Xu, C., & Cho, H. (2021). Effect of methanol/water mixed fuel compound injection on engine combustion and emissions. Energies, 14(15). https://doi.org/10.3390/en14154491 DOI: https://doi.org/10.3390/en14154491

Zhang, H. ., & Li, D. (2022). Diagnostic Communication and Visual System based on Vehicle UDS Protocol. ArXiv Preprint ArXiv:2206.12653, 1, 1–4.