Pemetaan Pemahaman Konsep Analisis Pengukuran Fisika dan Mekanika Analitik Pada Mahasiswa Program Studi Pendidikan Fisika Tahun Pertama

Authors

  • Latiifah Nur’Aini Universitas Negeri Yogyakarta
  • Faradiva Anggraena Putri Universitas Negeri Yogyakarta
  • Bayu Setiaji Universitas Negeri Yogyakarta

DOI:

https://doi.org/10.47134/physics.v1i1.132

Keywords:

Understanding Physics Concepts, Physics Education, Analysis of Physical Measurements,, Analytical Mechanics

Abstract

Physics education study program students should have a high level of understanding of physics concepts. However, in reality the level of understanding of physics concepts for students in physics education study programs is still low. The aim of this research is to determine the distribution of students' level of conceptual understanding in the physics education study program in their first year. The research method used by the author is quantitative descriptive. This research was conducted on 43 Class C Physics Education study program students Class C of 2022 in their first year studying at Yogyakarta State University. The results of this research show that the level of conceptual understanding of Physics Education study program students in the Physics Measurement Analysis (APF) and Analytical Mechanics courses is very different in their first year of study with the average UAS score in the APF course being 2.89 and in the Analytical Mechanics course of 9.04. Therefore, alternatives are needed to improve and equalize student understanding of concepts in courses in the Physics Education study program, one of which is by improving the quality of teaching and organization in the learning process, increasing student involvement in learning physics, using effective learning methods to increase understanding. physics concepts, as well as increasing collaboration between students, lecturers and institutions in increasing understanding of physics concepts.

References

Anas, L. (2019). Pengembangan sistem aplikasi multimedia interaktif pada pelajaran (fisika energy) untuk tingkat sekolah menengah atas. JTP-Jurnal Teknologi Pendidikan, 21(1), 24–41. DOI: https://doi.org/10.21009/jtp.v21i1.10570

Arifuddin, A., Sutrio, S., & Taufik, M. (2022). Pengembangan bahan ajar kontekstual berbasis hands on activity dalam pembelajaran fisika untuk meningkatkan pemahaman konsep fisika peserta didik. Jurnal Ilmiah Profesi Pendidikan, 7(2c), 894–900. DOI: https://doi.org/10.29303/jipp.v7i2c.631

Athron, P. (2021). New physics explanations of aμ in light of the FNAL muon g − 2 measurement. Journal of High Energy Physics, 2021(9). https://doi.org/10.1007/JHEP09(2021)080 DOI: https://doi.org/10.1007/JHEP09(2021)080

Bechtle, P. (2021). HiggsSignals-2: probing new physics with precision Higgs measurements in the LHC 13 TeV era. European Physical Journal C, 81(2). https://doi.org/10.1140/epjc/s10052-021-08942-y DOI: https://doi.org/10.1140/epjc/s10052-021-08942-y

Chen, Z. (2020). Mechanics-based analytical models for balloon-type cross-laminated timber (CLT) shear walls under lateral loads. Engineering Structures, 208. https://doi.org/10.1016/j.engstruct.2019.109916 DOI: https://doi.org/10.1016/j.engstruct.2019.109916

Connors, M. (2018). Jet measurements in heavy ion physics. Reviews of Modern Physics, 90(2). https://doi.org/10.1103/RevModPhys.90.025005 DOI: https://doi.org/10.1103/RevModPhys.90.025005

Duggan, S., & Gott, R. (2002). What Sort of Science Education Do We Really Need? International Journal of Science Education, 24(7), 661–679. DOI: https://doi.org/10.1080/09500690110110133

El-Zeadani, M. R. (2019). Analytical mechanics solution for measuring the deflection of strengthened RC beams using FRP plates. Case Studies in Construction Materials, 11. https://doi.org/10.1016/j.cscm.2019.e00272 DOI: https://doi.org/10.1016/j.cscm.2019.e00272

Erfan, M., & Ratu, T. (2017). Identifikasi Kesulitan Belajar Mahasiswa Pada Materi Elektrodinamika Ditinjau Dari Kemampuan Matematika. DOI: https://doi.org/10.31227/osf.io/e8ak9

Hajratun, S., Susilawati, S., & Ayub, S. (2022). Validitas Perangkat Pembelajaran Hukum Newton Menggunakan Model Concept Attainment untuk Meningkatkan Pemahaman Konsep Peserta Didik. Jurnal Ilmiah Profesi Pendidikan, 7(2b), 480–485. DOI: https://doi.org/10.29303/jipp.v7i2b.485

Kirin, S. (2020). Comparison of experimental, numerical and analytical risk assessment of oil drilling rig welded pipe based on fracture mechanics parameters. Engineering Failure Analysis, 114. https://doi.org/10.1016/j.engfailanal.2020.104600 DOI: https://doi.org/10.1016/j.engfailanal.2020.104600

Kiswanto, H. (2022). Fisika Lingkungan: Memahami Alam dengan Fisika. Syiah Kuala University Press.

Kowalska, K. (2019). Implications for new physics in b→ sμμ transitions after recent measurements by Belle and LHCb. European Physical Journal C, 79(10). https://doi.org/10.1140/epjc/s10052-019-7330-2 DOI: https://doi.org/10.1140/epjc/s10052-019-7330-2

Krathwohl, D. R. (2002). A Revision of Bloom’s Taxonomy: An Overview. Theory into Practice, 41(4), 212–218. DOI: https://doi.org/10.1207/s15430421tip4104_2

Kurniawati, Y., Permanasari, A., & Muzakir, A. (2013). Kemampuan bereksperimen sintesis senyawa anorganik & interelasinya dengan penguasaan konsep kimia anorganik pada mahasiswa calon guru kimia. Jurnal Pendidikan IPA Indonesia, 2(1), 57–64. DOI: https://doi.org/10.24014/konfigurasi.v1i2.4537

Lemos, N. A. (2018). Analytical Mechanics. Analytical Mechanics, 1–460. https://doi.org/10.1017/9781108241489 DOI: https://doi.org/10.1017/9781108241489

Lesmana, T., Iskandar, Y., & Heliani, H. (2020). Pengaruh kinerja keuangan terhadap nilai perusahaan pada perusahaan rokok yang terdaftar di bursa efek Indonesia. Jurnal Proaksi, 7(2), 25–34. DOI: https://doi.org/10.32534/jpk.v7i2.1161

Nugraheni, D. (2017). Analisis kesulitan belajar mahasiswa pada mata kuliah mekanika. Edu Sains: Jurnal Pendidikan Sains Dan Matematika, 5(1), 23–32. DOI: https://doi.org/10.23971/eds.v5i1.586

Pang, P. T. H. (2021). Nuclear Physics Multimessenger Astrophysics Constraints on the Neutron Star Equation of State: Adding NICER’s PSR J0740+6620 Measurement. Astrophysical Journal, 922(1). https://doi.org/10.3847/1538-4357/ac19ab DOI: https://doi.org/10.3847/1538-4357/ac19ab

Planinic, M. (2019). Rasch analysis in physics education research: Why measurement matters. Physical Review Physics Education Research, 15(2). https://doi.org/10.1103/PhysRevPhysEducRes.15.020111 DOI: https://doi.org/10.1103/PhysRevPhysEducRes.15.020111

Puri, P. R. A., & Perdana, R. (2023). Analisis Kemampuan Pemahaman Konsep Fisika Peserta Didik SMA Di Bantul Pada Materi Fluida Statis Dan Upaya Peningkatannya Melalui Model Pembelajaran Visualization Auditory Kinesthetic. MAGNETON: Jurnal Inovasi Pembelajaran Fisika, 1(2), 93–101. DOI: https://doi.org/10.30822/magneton.v1i2.2463

Reid, N., & Shah, I. (2006). The Role of Laboratory Work in University Chemistry. Chemistry Education Research and Practice, 8(2), 172–185.RPS, Program Studi Pendidikan Fisika Universitas Negeri Yogyakarta. (n.d.). https://fisika.fmipa.uny.ac.id/id/rps

Sirunyan, A. M. (2019). Measurement of electroweak WZ boson production and search for new physics in WZ + two jets events in pp collisions at s=13TeV. Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 795, 281–307. https://doi.org/10.1016/j.physletb.2019.05.042 DOI: https://doi.org/10.1016/j.physletb.2019.05.042

Smith, E. M. (2020). Direct measurement of the impact of teaching experimentation in physics labs. Physical Review X, 10(1). https://doi.org/10.1103/PhysRevX.10.011029 DOI: https://doi.org/10.1103/PhysRevX.10.011029

Sushila. (2021). A hybrid analytical algorithm for thin film flow problem occurring in non-Newtonian fluid mechanics. Ain Shams Engineering Journal, 12(2), 2297–2302. https://doi.org/10.1016/j.asej.2020.09.006 DOI: https://doi.org/10.1016/j.asej.2020.09.006

Taylor, J. R., & Thompson, W. (1982). An Introduction to Error Analysis: The Study of Uncertainties in Physical Measurements (Vol. 2). University Science Books.

Wu, X. R. (2019). A review and verification of analytical weight function methods in fracture mechanics. Fatigue and Fracture of Engineering Materials and Structures, 42(9), 2017–2042. https://doi.org/10.1111/ffe.13073 DOI: https://doi.org/10.1111/ffe.13073

Yaylacı, M. (2021). Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM. Computers and Concrete, 27(3), 199–210. https://doi.org/10.12989/cac.2021.27.3.199

Zhang, Z. (2019). Analytical Prediction for Tunnel-Soil-Pile Interaction Mechanics based on Kerr Foundation Model. KSCE Journal of Civil Engineering, 23(6), 2756–2771. https://doi.org/10.1007/s12205-019-0791-x DOI: https://doi.org/10.1007/s12205-019-0791-x

Downloads

Published

2023-12-06

How to Cite

Nur’Aini, L., Putri, F. A., & Setiaji, B. (2023). Pemetaan Pemahaman Konsep Analisis Pengukuran Fisika dan Mekanika Analitik Pada Mahasiswa Program Studi Pendidikan Fisika Tahun Pertama. Journal of Physics Education and Science, 1(1), 10. https://doi.org/10.47134/physics.v1i1.132

Issue

Section

Articles