Pengaruh Besar Sudut pada Servis Bulu Tangkis dengan Gerak Parabola

Nazura  Audrianita; Theresia Adinia Septiana Rasti; Bayu Setiaji

doi:10.47134/physics.v1i1.144

Authors

Nazura Audrianita Universitas Negeri Yogyakarta
Theresia Adinia Septiana Rasti Universitas Negeri Yogyakarta
Bayu Setiaji Universitas Negeri Yogyakarta

DOI:

https://doi.org/10.47134/physics.v1i1.144

Keywords:

Large Angles, Parabolic Motion, Badminton

Abstract

Badminton athletes apply various techniques and strategies when competing. One technique is to apply the correct serve to bounce the shuttlecock. The aim of this research is to determine the effect of how big the angle of the racket can be over the net and on target. This research applies an experimental method, which was chosen with the main aim of this research being to test an object. In this context, the focus is on angle variations to determine the optimal angle for the badminton player when serving so that the shuttlecock can fall over the net with different elasticity. In this experiment, the parabolic motion recordings were analyzed using the Tracker application to obtain the initial speed for each angular variation. The shuttlecock's initial speed can be used to calculate the shuttlecock's highest point, the time it reaches its maximum height, and the shuttlecock's furthest distance. The results showed that differences in the initial angle of the backhand serve caused differences in the maximum height, distance and time achieved.

References

Afifah, D. N., Yulianawati, D., Agustina, N., Lestari, R. D. S., & Nugraha, M. G. (2015, June). Metode sederhana menentukan percepatan gravitasi bumi menggunakan aplikasi tracker pada gerak parabola sebagai media dalam pembelajaran fisika SMA. Prosiding Seminar Nasional Inovasi Dan Pembelajaran Sains.

Aldaz, L. (2022). The influence of optical characterization at different angles of incidence on optical efficiency calculation of a novel small-size parabolic trough collector for process heat applications. AIP Conference Proceedings, 2445. https://doi.org/10.1063/5.0085907 DOI: https://doi.org/10.1063/5.0085907

Bayu Septa Martaviano Triaiditya, S. (2020). PENGARUH SUDUT KEMIRINGAN RAKET TERHADAP PANTULAN SHUTTLECOCK BULU TANGKIS. Jurnal SPORTIF: Jurnal Penelitian Pembelajaran, 6(1). DOI: https://doi.org/10.29407/js_unpgri.v6i1.13875

Fujiwara, Y. (2018). Influence of incident angle of sputtered atom on the size and shape of granule in granular films using CoFeAlSi alloy. Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 36(2). https://doi.org/10.1116/1.5002608 DOI: https://doi.org/10.1116/1.5002608

Gao, J. (2020). Influence of the Size and the Angle of Branches Connected to the Main Horizontal Pipe on the Onset of Gas Entrainment. Frontiers in Energy Research, 8. https://doi.org/10.3389/fenrg.2020.00008 DOI: https://doi.org/10.3389/fenrg.2020.00008

Harris, Z. (2023). Assessing the influence of microstructure on uranium hydride size distributions via small angle neutron scattering. Materialia, 28. https://doi.org/10.1016/j.mtla.2023.101737 DOI: https://doi.org/10.1016/j.mtla.2023.101737

Jan, C. D. (2023). The influence of particle size on the spread distance and angle of friction of granular materials. E3S Web of Conferences, 415. https://doi.org/10.1051/e3sconf/202341501011 DOI: https://doi.org/10.1051/e3sconf/202341501011

Junanda, H. A., Rusdiana, A., & Rahayu, N. I. (2016). Kecepatandan Akurasi Shuttlecock pada Jump Smash dengan Loncatan Vertikal dan Parabol Depan dalam Bulutangkis. Jurnal Terapan Ilmu Keolahragaan, 1(1). DOI: https://doi.org/10.17509/jtikor.v1i1.1548

Miftakhurrohman, & Muhafid, E. A. (2022). Analisis Kemampuan Teknik Pukulan Atlet Bulu Tangkis. Jurnal Olahraga Dan Kesehatan Indonesia (JOKI), 3(1), 32–37. https://doi.org/10.55081/joki.v3i1.775

Miyai, S. (2019). Influence of Angle on Plate Penetration into Dense Granular Materials (Large-scale DEM Simulation Using Real Particle Size). Journal of the Society of Powder Technology, Japan, 56(12), 654–665. https://doi.org/10.4164/sptj.56.654 DOI: https://doi.org/10.4164/sptj.56.654

Muaflah, A. A., & Indarto, P. (2023). Analisis keterampilan short service backhand pada bulutangkis. Jurnal Porkes, 6(1), 216–232. DOI: https://doi.org/10.29408/porkes.v6i1.13681

Nishida, M. (2019). Influence of impact angle on size distribution of fragments in hypervelocity impacts. International Journal of Impact Engineering, 128, 86–93. https://doi.org/10.1016/j.ijimpeng.2019.02.006 DOI: https://doi.org/10.1016/j.ijimpeng.2019.02.006

Oliveira, A. V. (2023). The Influence of Static Pressure on Bubble Size and Contact Angle of Quartz: Mimicking What May Happen Inside a Hypothetical Flotation Column. Minerals, 13(3). https://doi.org/10.3390/min13030417 DOI: https://doi.org/10.3390/min13030417

Pavicic, T. (2019). Influence of needle size and injection angle on the distribution pattern of facial soft tissue fillers. Journal of Cosmetic Dermatology, 18(5), 1230–1236. https://doi.org/10.1111/jocd.13066 DOI: https://doi.org/10.1111/jocd.13066

Prashanth, N. (2020). Influence of erodent size, impingement angle and fillers on solid particle erosion wear behaviour of carbon fiber reinforced epoxy composite. AIP Conference Proceedings, 2204. https://doi.org/10.1063/1.5141593 DOI: https://doi.org/10.1063/1.5141593

Rusydi, M. I., Sasaki, M., Sucipto, M. H., & Windasari, N. (2015). Local euler angle pattern recognition for smash and backhand in badminton based on arm position. Procedia Manufacturing, 3, 898–903. DOI: https://doi.org/10.1016/j.promfg.2015.07.125

Suardi, V. I. (2018). Kemampuan Servis Mahasiswa Bulutangkis Dasar. Jurnal Patriot, 402–408. https://doi.org/10.24036/patriot.v0i0.63

Trong, D. N. (2021). The study of the influence of matrix, size, rotation angle, and magnetic field on the isothermal entropy, and the néel phase transition temperature of fe2 o3 nanocomposite thin films by the monte-carlo simulation method. Coatings, 11(10). https://doi.org/10.3390/coatings11101209 DOI: https://doi.org/10.3390/coatings11101209

Vargas, S. (2023). Influence of Tilting Angle on Temperature Measurements of Different Object Sizes Using Fiber-Optic Pyrometers. Sensors, 23(19). https://doi.org/10.3390/s23198119 DOI: https://doi.org/10.3390/s23198119

Vernando, Y. T., Adi, S., & Wahyudi, U. (2017). MODEL LATIHAN FOREHAND SMASH BULUTANGKIS BAGI ATLET PB SEMERU PUGER KABUPATEN JEMBER USIA 12–15 TAHUN. Gelanggang Pendidikan Jasmani Indonesia, 1(1), 1–12. DOI: https://doi.org/10.17977/um040v1i1p1-12

Wang, T. (2022). Influence of face grain angle, size, and moisture content on the edgewise bending strength and stiffness of birch plywood. Materials and Design, 223.https://doi.org/10.1016/j.matdes.2022.111227 DOI: https://doi.org/10.1016/j.matdes.2022.111227

Wijaya, A. (2017). Analisis gerak keterampilan servis dalam permainan Bulutangkis (suatu tinjauan anatomi, fisiologi, dan biomekanika). Indonesia Performance Journal, 1(2), 106–111.

Yankovsky, S. (2023). Influence of Grinding Methodology and Particle Size on Coal and Wood Co-Combustion via Injection Flame Opening Angle. Energies, 16(11). https://doi.org/10.3390/en16114469 DOI: https://doi.org/10.3390/en16114469

Yuningsih, N., & Sardjito, S. (2020). Gerak Vertikal Benda Berukuran Berbeda yang Jatuh Tanpa Kecepatan Awal dan Bergesekan dengan Udara. Prosiding Industrial Research Workshop and National Seminar, 11(1), 710–714.

Zhang, Y. (2023). Influence of Goniotomy Size on Treatment Safety and Efficacy for Primary Open-Angle Glaucoma: A Multicenter Study. American Journal of Ophthalmology, 256, 118–125. https://doi.org/10.1016/j.ajo.2023.08.002 DOI: https://doi.org/10.1016/j.ajo.2023.08.002

Zhu, X. (2022). Influence of inclination angle, shape and size of the flow channels on the AlSi10Mg complex products fabricated by selective laser melting. Journal of Manufacturing Processes, 83, 157–171. https://doi.org/10.1016/j.jmapro.2022.08.057 DOI: https://doi.org/10.1016/j.jmapro.2022.08.057